Electronic wash basin tap XERIS E-T

HD-M mid - high-pressure mixed water, ThermoProtect thermostat

Scope of delivery

• Infrared sensor single-hole tap
• ThermoProtect thermostat, conform to EN 1111, temperature lock (factory setting 38 °C), anti-scalding protection if cold water supply fails
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Technical data

• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Sensor range (short/medium/long)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Thermal disinfection: possible, after releasing the temperature lock
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: PA-IX 29073/IO, Belgaqua
• Noise class: I
• Flow class: O